Back to Air-Float Tables & Factory Auxiliary Equipment返回气浮平台与工厂辅助设备EQUIPMENT SELECTION设备选型

How to Choose Air-Float Tables & Factory Auxiliary Equipment气浮平台与工厂辅助设备选型指南

Choose the process and transfer method around the real workpiece, production sequence and factory layout. Use the checklist below to compare suitable equipment without mixing different machine types.应围绕真实工件、生产顺序和工厂布局选择工艺与输送方式。使用下方清单比较适用设备，避免把不同设备类型混为一谈。

Equipment covered包含设备

Product types within air-float tables & factory auxiliary equipment.气浮平台与工厂辅助设备包含的产品类型

Review air-cushion transfer tables, ball platforms, storage racks and practical auxiliary equipment for furniture production workstations.了解家具生产工位使用的气垫移载台、万向球平台、储料架和实用辅助设备。

Selection checklist选型清单

Information to confirm before selecting equipment.选择设备前需要确认的资料

workpiece underside and surface工件底面与表面

Confirm the full operating range for workpiece underside and surface, including normal and exceptional production conditions.确认工件底面与表面的完整运行范围，包括正常及特殊生产条件。

manual task人工任务

Confirm the full operating range for manual task, including normal and exceptional production conditions.确认人工任务的完整运行范围，包括正常及特殊生产条件。

movement direction移动方向

Confirm the full operating range for movement direction, including normal and exceptional production conditions.确认移动方向的完整运行范围，包括正常及特殊生产条件。

load载荷

Confirm the full operating range for load, including normal and exceptional production conditions.确认载荷的完整运行范围，包括正常及特殊生产条件。

working height工作高度

Confirm the full operating range for working height, including normal and exceptional production conditions.确认工作高度的完整运行范围，包括正常及特殊生产条件。

storage purpose and available area存放用途和可用区域

Confirm the full operating range for storage purpose and available area, including normal and exceptional production conditions.确认存放用途和可用区域的完整运行范围，包括正常及特殊生产条件。

Selection process选型流程

Move from workpiece data to a confirmed layout.从工件数据到确认布局

  1. 01

    Define the workpiece range确定工件范围

    Provide minimum, maximum and typical products, including weight, surface and supporting underside.提供最小、最大及常用产品，包括重量、表面和承载底面。

  2. 02

    Map the production sequence梳理生产顺序

    Show where the equipment receives, processes, transfers and releases each workpiece.说明设备在何处接收、处理、转运和释放每件工件。

  3. 03

    Confirm interfaces and cycle确认接口与节拍

    Record machine models, heights, directions, signals, operator tasks and target production rate.记录主机型号、高度、方向、信号、操作任务和目标产能。

  4. 04

    Review the proposed layout检查建议布局

    Check access, safety area, maintenance space, utilities and exceptional workpiece handling before final confirmation.最终确认前检查通道、安全区域、维护空间、公用条件和特殊工件处理方式。

Buyer questions采购问题

Questions before choosing a machine or line.选择单机或整线前的常见问题

Which air-float tables & factory auxiliary equipment configuration should I choose?气浮平台与工厂辅助设备应该选择哪种配置？

Start with the actual workpiece and production flow, then confirm workpiece underside and surface, manual task, movement direction, load, working height, storage purpose and available area. Select the machine type only after the required transfer or process sequence is clear.先从实际工件和生产流程出发，再确认工件底面与表面、人工任务、移动方向、载荷、工作高度、存放用途和可用区域。明确所需输送或工艺顺序后，再选择设备类型。

Can the equipment connect to an existing production line?设备可以连接现有生产线吗？

Connection suitability depends on the existing machine model, interface height, workpiece orientation, cycle, control signals and available space. Provide a layout and interface information before the configuration is fixed.能否连接取决于现有主机型号、接口高度、工件朝向、节拍、控制信号和可用空间。确定配置前应提供布局和接口资料。

What should be confirmed before selecting a model?选择型号前应该确认什么？

Confirm the complete operating range rather than one sample: workpiece underside and surface, manual task, movement direction, load, working height, storage purpose and available area. Also identify unusual workpieces, peak production conditions and future changes that the system may need to handle.应确认完整运行范围，而不是只看一个样品，包括工件底面与表面、人工任务、移动方向、载荷、工作高度、存放用途和可用区域。同时说明异常工件、峰值生产条件以及未来可能需要兼容的变化。

Request a project review提交项目评估 Open price and quotation guide打开价格与报价指南