Back to Panel Hydraulic Lifting Tables返回板材液压升降台EQUIPMENT SELECTION设备选型

How to Choose Panel Hydraulic Lifting Tables板材液压升降台选型指南

Select a hydraulic scissor lift table by its load, working-height range and top surface. A fixed platform, roller top, E-type platform and forklift-access arrangement solve different loading and transfer tasks.液压剪叉升降台应按载荷、工作高度范围和台面选型。固定台面、滚筒台面、E 型平台及叉车位配置对应不同上料和移载任务。

Equipment covered包含设备

Product types within panel hydraulic lifting tables.板材液压升降台包含的产品类型

Compare fixed, roller, belt, E-type, rotating and forklift-access lifting tables for panel stacks and production transfer.比较用于板垛和生产转运的固定式、滚筒式、皮带式、E型、旋转式及叉车位升降台。

Compare configurations比较实际配置

Which equipment arrangement fits your production task?哪种设备配置适合您的生产任务？

Check load position as well as total weight除了总重量，还要核对载荷位置

Include the workpiece, stack and any pallet or fixture in the load description. State whether the weight is evenly distributed or concentrated, and show the center of gravity. A capacity label alone does not establish suitability for an offset stack or a load extending beyond the platform.载荷说明应包括工件、板垛及托盘或工装，明确均布还是集中载荷，并标出重心。仅凭额定承载标签，不能确认偏心板垛或超出台面载荷的适用性。

Choose a fixed, roller or powered transfer surface选择固定、滚筒或动力移载台面

A fixed platform supports the load during vertical movement. A roller top provides a rolling interface; powered rollers or a belt add a specified transfer function. FORTRAN lists these as different configurations. Choose the surface around how material enters and leaves, rather than comparing lifting capacity alone.固定台面在垂直运动中支撑载荷；滚筒台面提供滚动接口；动力滚筒或皮带增加相应移载功能。FORTRAN 资料将其列为不同配置。应根据物料进出方式选择台面，不能只比较承载量。

E-type, forklift access and installation height are separate checksE 型、叉车位及安装高度需分别核对

Show the pallet or load-support geometry and the actual handling vehicle, including fork spacing and approach direction. Confirm the fully lowered and raised working heights, clearances and any pit arrangement. An E-shaped platform or forklift-access label does not establish compatibility with every pallet truck or pallet.提供托盘或载荷支撑结构，以及实际搬运车辆、货叉间距和接近方向。确认最低和最高工作高度、净空及地坑布置。E 型外形或叉车位名称，不代表适配所有搬运车和托盘。

Selection process选型流程

Move from workpiece data to a confirmed layout.从工件数据到确认布局

  1. 01

    Define the workpiece range确定工件范围

    Provide minimum, maximum and typical products, including weight, surface and supporting underside.提供最小、最大及常用产品，包括重量、表面和承载底面。

  2. 02

    Map the production sequence梳理生产顺序

    Show where the equipment receives, processes, transfers and releases each workpiece.说明设备在何处接收、处理、转运和释放每件工件。

  3. 03

    Confirm interfaces and cycle确认接口与节拍

    Record machine models, heights, directions, signals, operator tasks and target production rate.记录主机型号、高度、方向、信号、操作任务和目标产能。

  4. 04

    Review the proposed layout检查建议布局

    Check access, safety area, maintenance space, utilities and exceptional workpiece handling before final confirmation.最终确认前检查通道、安全区域、维护空间、公用条件和特殊工件处理方式。

Buyer questions采购问题

Questions before choosing a machine or line.选择单机或整线前的常见问题

Is a roller-top lift table automatically powered for horizontal transfer?滚筒台面升降台一定带水平输送动力吗？

No. The lifting mechanism and horizontal-transfer drive are separate functions. FORTRAN lists fixed roller, powered roller and powered belt arrangements. Confirm the drive for each movement, the transfer direction and the connection to the neighboring conveyor in the selected configuration.不是。升降机构与水平移载驱动是不同功能。FORTRAN 资料分别列有固定滚筒、动力滚筒和动力皮带配置。应确认各动作的驱动、移载方向及与相邻输送线的连接。

How do I choose between a 1-ton and a 3-ton panel lift table?1 吨与 3 吨板材升降台如何选择？

Start with the maximum total load including its carrier, load distribution, platform dimensions and required height range. Compare the exact configuration documents rather than scaling one model by weight. Also describe loading impacts, transfer method and the expected working frequency for the supplier review.先确认包含载具的最大总载荷、载荷分布、台面尺寸及高度范围。应比较具体配置文件，不能按重量比例放大某一型号。还应说明装载冲击、移载方式和预计工作频率，供供应商评估。

What height should I send when connecting a lift to a conveyor?升降台对接输送线时应提供什么高度？

Measure the receiving and delivery surfaces from the same finished-floor reference. Provide the required lowest and highest working positions, the top-surface type and the transition gap. Distinguish the overall working height from vertical travel; they are not the same measurement.以同一完成地面为基准测量接料和出料表面，提供所需最低及最高工作位置、台面形式和过渡间隙。应区分工作高度与升降行程，两者不是同一尺寸。

Request a project review提交项目评估 Open price and quotation guide打开价格与报价指南