Back to Panel Transfer & Turnover Equipment返回板材转运与翻转设备EQUIPMENT SELECTION设备选型

How to Choose Panel Transfer & Turnover Equipment板材转运与翻转设备选型指南

Choose the process and transfer method around the real workpiece, production sequence and factory layout. Use the checklist below to compare suitable equipment without mixing different machine types.应围绕真实工件、生产顺序和工厂布局选择工艺与输送方式。使用下方清单比较适用设备，避免把不同设备类型混为一谈。

Equipment covered包含设备

Product types within panel transfer & turnover equipment.板材转运与翻转设备包含的产品类型

Select panel turnover machines, rotating tables and transfer trolleys for controlled orientation changes and workstation movement.选择用于受控改变板件朝向和工位转运的翻板机、旋转台和移载台车。

Selection checklist选型清单

Information to confirm before selecting equipment.选择设备前需要确认的资料

panel dimensions and weight板件尺寸与重量

Confirm the full operating range for panel dimensions and weight, including normal and exceptional production conditions.确认板件尺寸与重量的完整运行范围，包括正常及特殊生产条件。

required rotation angle and axis旋转角度和轴向

Confirm the full operating range for required rotation angle and axis, including normal and exceptional production conditions.确认旋转角度和轴向的完整运行范围，包括正常及特殊生产条件。

surface protection表面保护

Confirm the full operating range for surface protection, including normal and exceptional production conditions.确认表面保护的完整运行范围，包括正常及特殊生产条件。

transfer height输送高度

Confirm the full operating range for transfer height, including normal and exceptional production conditions.确认输送高度的完整运行范围，包括正常及特殊生产条件。

cycle and available footprint节拍和可用空间

Confirm the full operating range for cycle and available footprint, including normal and exceptional production conditions.确认节拍和可用空间的完整运行范围，包括正常及特殊生产条件。

Selection process选型流程

Move from workpiece data to a confirmed layout.从工件数据到确认布局

  1. 01

    Define the workpiece range确定工件范围

    Provide minimum, maximum and typical products, including weight, surface and supporting underside.提供最小、最大及常用产品，包括重量、表面和承载底面。

  2. 02

    Map the production sequence梳理生产顺序

    Show where the equipment receives, processes, transfers and releases each workpiece.说明设备在何处接收、处理、转运和释放每件工件。

  3. 03

    Confirm interfaces and cycle确认接口与节拍

    Record machine models, heights, directions, signals, operator tasks and target production rate.记录主机型号、高度、方向、信号、操作任务和目标产能。

  4. 04

    Review the proposed layout检查建议布局

    Check access, safety area, maintenance space, utilities and exceptional workpiece handling before final confirmation.最终确认前检查通道、安全区域、维护空间、公用条件和特殊工件处理方式。

Buyer questions采购问题

Questions before choosing a machine or line.选择单机或整线前的常见问题

Which panel transfer & turnover equipment configuration should I choose?板材转运与翻转设备应该选择哪种配置？

Start with the actual workpiece and production flow, then confirm panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint. Select the machine type only after the required transfer or process sequence is clear.先从实际工件和生产流程出发，再确认板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间。明确所需输送或工艺顺序后，再选择设备类型。

Can the equipment connect to an existing production line?设备可以连接现有生产线吗？

Connection suitability depends on the existing machine model, interface height, workpiece orientation, cycle, control signals and available space. Provide a layout and interface information before the configuration is fixed.能否连接取决于现有主机型号、接口高度、工件朝向、节拍、控制信号和可用空间。确定配置前应提供布局和接口资料。

What should be confirmed before selecting a model?选择型号前应该确认什么？

Confirm the complete operating range rather than one sample: panel dimensions and weight, required rotation angle and axis, surface protection, transfer height, cycle and available footprint. Also identify unusual workpieces, peak production conditions and future changes that the system may need to handle.应确认完整运行范围，而不是只看一个样品，包括板件尺寸与重量、旋转角度和轴向、表面保护、输送高度、节拍和可用空间。同时说明异常工件、峰值生产条件以及未来可能需要兼容的变化。

Request a project review提交项目评估 Open price and quotation guide打开价格与报价指南