Back to Panel Sorting, Buffer & Storage Systems返回板材分拣、缓存与存储系统EQUIPMENT SELECTION设备选型

How to Choose Panel Sorting, Buffer & Storage Systems板材分拣、缓存与存储系统选型指南

Choose the process and transfer method around the real workpiece, production sequence and factory layout. Use the checklist below to compare suitable equipment without mixing different machine types.应围绕真实工件、生产顺序和工厂布局选择工艺与输送方式。使用下方清单比较适用设备，避免把不同设备类型混为一谈。

Equipment covered包含设备

Product types within panel sorting, buffer & storage systems.板材分拣、缓存与存储系统包含的产品类型

Coordinate order sequence, temporary work-in-process storage and material flow between furniture production stages.协调家具生产工序之间的订单排序、在制品暂存和物料流转。

Selection checklist选型清单

Information to confirm before selecting equipment.选择设备前需要确认的资料

panel identification and order logic板件识别及订单逻辑

Confirm the full operating range for panel identification and order logic, including normal and exceptional production conditions.确认板件识别及订单逻辑的完整运行范围，包括正常及特殊生产条件。

storage quantity存储数量

Confirm the full operating range for storage quantity, including normal and exceptional production conditions.确认存储数量的完整运行范围，包括正常及特殊生产条件。

entry and exit sequence出入库顺序

Confirm the full operating range for entry and exit sequence, including normal and exceptional production conditions.确认出入库顺序的完整运行范围，包括正常及特殊生产条件。

workpiece range工件范围

Confirm the full operating range for workpiece range, including normal and exceptional production conditions.确认工件范围的完整运行范围，包括正常及特殊生产条件。

upstream and downstream cycles and layout height前后道节拍和布局高度

Confirm the full operating range for upstream and downstream cycles and layout height, including normal and exceptional production conditions.确认前后道节拍和布局高度的完整运行范围，包括正常及特殊生产条件。

Selection process选型流程

Move from workpiece data to a confirmed layout.从工件数据到确认布局

  1. 01

    Define the workpiece range确定工件范围

    Provide minimum, maximum and typical products, including weight, surface and supporting underside.提供最小、最大及常用产品，包括重量、表面和承载底面。

  2. 02

    Map the production sequence梳理生产顺序

    Show where the equipment receives, processes, transfers and releases each workpiece.说明设备在何处接收、处理、转运和释放每件工件。

  3. 03

    Confirm interfaces and cycle确认接口与节拍

    Record machine models, heights, directions, signals, operator tasks and target production rate.记录主机型号、高度、方向、信号、操作任务和目标产能。

  4. 04

    Review the proposed layout检查建议布局

    Check access, safety area, maintenance space, utilities and exceptional workpiece handling before final confirmation.最终确认前检查通道、安全区域、维护空间、公用条件和特殊工件处理方式。

Buyer questions采购问题

Questions before choosing a machine or line.选择单机或整线前的常见问题

Which panel sorting, buffer & storage systems configuration should I choose?板材分拣、缓存与存储系统应该选择哪种配置？

Start with the actual workpiece and production flow, then confirm panel identification and order logic, storage quantity, entry and exit sequence, workpiece range, upstream and downstream cycles and layout height. Select the machine type only after the required transfer or process sequence is clear.先从实际工件和生产流程出发，再确认板件识别及订单逻辑、存储数量、出入库顺序、工件范围、前后道节拍和布局高度。明确所需输送或工艺顺序后，再选择设备类型。

Can the equipment connect to an existing production line?设备可以连接现有生产线吗？

Connection suitability depends on the existing machine model, interface height, workpiece orientation, cycle, control signals and available space. Provide a layout and interface information before the configuration is fixed.能否连接取决于现有主机型号、接口高度、工件朝向、节拍、控制信号和可用空间。确定配置前应提供布局和接口资料。

What should be confirmed before selecting a model?选择型号前应该确认什么？

Confirm the complete operating range rather than one sample: panel identification and order logic, storage quantity, entry and exit sequence, workpiece range, upstream and downstream cycles and layout height. Also identify unusual workpieces, peak production conditions and future changes that the system may need to handle.应确认完整运行范围，而不是只看一个样品，包括板件识别及订单逻辑、存储数量、出入库顺序、工件范围、前后道节拍和布局高度。同时说明异常工件、峰值生产条件以及未来可能需要兼容的变化。

Request a project review提交项目评估 Open price and quotation guide打开价格与报价指南