Complete equipment catalogue 完整设备目录 02 / EQUIPMENT SYSTEM 02 / 设备系统 Conveying systems 输送系统 Powered and gravity transfer for keeping panels moving between machines and workstations. 通过动力与无动力滚筒，在设备和工位之间稳定输送板材。
42 equipment and line solutions 项相关设备与整线方案 Configured around the workpiece 根据工件配置 Configured for the target output 按目标产能配置 Existing interfaces reviewed before integration 联机前评估现有设备接口 Discuss on WhatsApp 通过 WhatsApp 沟通 02 / CONVEYING 02 / 输送
Compare conveying systems. 输送系统设备选型 Compare 42 relevant equipment and line solutions, then open a product page to review specifications or send an enquiry. 比较 42 项相关设备与整线方案，并打开产品页查看参数或提交咨询。
Category 工序类别 All products (42) Powered conveyors (8) Gravity conveyors & transfer (12) Edge-bander return systems (9) Lifting tables (13) All products 全部产品 42 Powered conveyors 板材动力滚筒输送系统 8 Gravity conveyors & transfer 无动力滚筒输送与移载设备 12 Edge-bander return systems 封边机自动回料系统 9 Lifting tables 板材液压升降台 13 Images and specifications show representative configurations. Final equipment details are confirmed for each project. 图片与参数展示代表性配置；最终设备细节将按具体项目确认。
M01 View details 查看详情 Powered conveyors 板材动力滚筒输送系统 180° Panel Turnover Machine 180° 板材翻转机 Turns panels through 180 degrees between processing stages so the opposite face can be handled or machined. 在加工工序之间将板材翻转180度，使另一面能够继续搬运或加工。
View specifications & enquire 查看参数并咨询 M02 View details 查看详情 Powered conveyors 板材动力滚筒输送系统 Vacuum-Type Panel Turnover Machine 吸盘式板材翻转机 Uses vacuum gripping to turn smooth or delicate panels with controlled contact during the turnover cycle. 采用真空吸附，以受控接触方式翻转表面光滑或易损的板材。
View specifications & enquire 查看参数并咨询 M03 View details 查看详情 Powered conveyors 板材动力滚筒输送系统 Horizontal Panel Turning Machine 板材水平翻转机 Turns panels horizontally between machine infeed and outfeed sections to match the orientation required by the next process. 在设备进出料段之间水平翻转板材，使其方向符合下一道工序要求。
View specifications & enquire 查看参数并咨询 M04 View details 查看详情 Powered conveyors 板材动力滚筒输送系统 Floor-Level Powered Roller Conveyor 地辊式动力滚筒输送机 Uses powered floor-level rollers to move panel loads automatically between nearby machines or workstations. 通过地面动力滚筒，在相邻设备或工作站之间自动输送板材载荷。
View specifications & enquire 查看参数并咨询 M05 View details 查看详情 Powered conveyors 板材动力滚筒输送系统 Cross-Frame Panel Turnover Machine 十字架式板材翻转机 Turns panels over within a cross-frame mechanism for stable orientation changes in an automated transfer line. 通过十字框架机构翻转板材，在自动输送线上稳定改变板材朝向。
View specifications & enquire 查看参数并咨询 M06 View details 查看详情 Powered conveyors 板材动力滚筒输送系统 Panel Turnover Machine 板材翻转机 Automatically turns panels over between processes and can be configured for the workpiece size, weight and line direction. 在工序之间自动翻转板材，并可根据工件尺寸、重量和生产线方向进行配置。
View specifications & enquire 查看参数并咨询 M07 View details 查看详情 Powered conveyors 板材动力滚筒输送系统 Belt-Type Panel Turnover Machine 皮带式板材翻转机 Uses belt-supported rotation to turn panels between the front and rear connections of sanding or finishing equipment. 采用皮带承托旋转，在砂光或饰面设备前后连接段之间完成板材翻转。
View specifications & enquire 查看参数并咨询 M08 View details 查看详情 Powered conveyors 板材动力滚筒输送系统 Curved Powered Roller Conveyor 弯道动力滚筒输送线 Provides powered roller transfer around a change of direction where the factory layout is not linear. 在厂房布局无法直线连接时，通过弯道动力滚筒完成转向输送。
View specifications & enquire 查看参数并咨询 M09 View details 查看详情 Gravity conveyors & transfer 无动力滚筒输送与移载设备 Double-Tier Slat-Style Scrap Rack for Furniture Factories 双层板材余料架 Stores panel offcuts and edge-banding strips in separated upper and lower positions beside the production area. 在生产区域旁分层存放板材余料和封边条，使不同材料保持有序。
View specifications & enquire 查看参数并咨询 M10 View details 查看详情 Gravity conveyors & transfer 无动力滚筒输送与移载设备 Panel Gravity Roller Conveyor Line 板材无动力滚筒输送线 Provides gravity roller transfer for panels and packaged products without a powered drive system. 无需动力驱动，通过重力滚筒输送板材和已包装产品。
View specifications & enquire 查看参数并咨询 M11 View details 查看详情 Gravity conveyors & transfer 无动力滚筒输送与移载设备 Gravity Roller Packaging Line 无动力滚筒包装线 Creates a practical gravity-roller line for manual packing, inspection and short-distance package transfer. 以无动力滚筒组成实用的人工包装线，用于包装、检查和短距离转运。
View specifications & enquire 查看参数并咨询 M12 View details 查看详情 Gravity conveyors & transfer 无动力滚筒输送与移载设备 Panel Edge Banding Strip Rack 板材封边条存放架 Keeps edge-banding strips separated, visible and ready for use beside the edge-banding workstation. 在封边工位旁分类存放封边条，使材料清晰可见并便于取用。
View specifications & enquire 查看参数并咨询 Show more products 查看更多产品 12 / 42 
Automation Technology